20 To 120 Mesh Powder Fineness 100 To 2000kg Capacity Cassia Powder
Pulverizer
Introduction:cassia powder pulverizer
BSDF cinnamon machine is the latest product of our company, specially designed for
crushing spices. It has three milling areas: Rough Milling area,
middle milling area and fine milling area,It means the material
will be ground three times at the same time. BSDF hammer mill is
suitable for grinding all kinds of materials, such as spices,
leaves, chickpeas, Gum Arabic, grains, animal feed, etc. .
Technical data:cassia powder pulverizer
| Model | BSDF-350 | BSDF-450 | BSDF-550 | BSDF-650 | BSDF-750 |
| Capacity(kg/h) | 100-200 | 300-500 | 400-800 | 600-900 | 800-1300 |
| Fineness(mesh) | 20-120 | 20-120 | 20-120 | 20-120 | 20-120 |
| Grind motor(kw) | 22 | 37 | 45 | 55 | 75 |
| Discharge motor(kw) | 0.75 | 0.75 | 0.75 | 1.1 | 1.5 |
| Blower(kw) | 7.5 | 15 | 15 | 18.5 | 18.5 |
| Rotor speed(rpm) | 3500-4500 | 3300-4200 | 2900-3600 | 2400-3100 | 2100-2700 |
Working method:cassia powder pulverizer
The material is fed into the grinding chamber and rotated at high
speed by three groups of knives in turn. The material is ground
three times in a mill and then turned into fine powder. In order to
ensure the fineness of powder, a device is designed between the
medium and fine grinding groups to prevent coarse particles from
entering the fine grinding area. The rotor speed is controlled by
the frequency converter, and different granularity can be realized
by adjusting the speed. There is no screen in the mill, so the heat
rising in the mill is very small.
Advantages:cassia powder pulverizer
(1) There is no need to screen or sieving in the mill, and the
powder particle size can be changed by variable speed;
(2) Because there is no sieve in the mill, there is no heat rise in
the mill when grinding; there is no need to worry about the power
in the screen or the quality of the product being affected , The
heat from the rolling mill. This is why it is very suitable for
grinding heat-sensitive materials or materials containing fiber or
oil.
(3) The mill part is a combination of coarse pulverizer,
medium-fine pulverizer and fine pulverizer, which can directly
obtain fine powder from large raw materials, which is very
effective.
(4) It can save more power, and its production capacity is far
greater than other traditional mills of the same motor type.
Main structure:cassia powder pulverizer
(1) the base: plays the connection and the support crusher each
component is an integral whole function. The crushed material is
discharged from one side of the crushing chamber.
(2) Rotor: It is composed of main shaft, Hammer frame, shaft pin,
Hammer head, bearing, etc. . It is the main moving part of the
crusher. Rotor speed is high, after assembly must be carried out
dynamic balance test, no shaft pin and Hammer.
(3) upper cover: upper side with feed hole, made of semi-circular
gear. The crushing chamber consists of an upper cover, a lower
cover and a rotor. The material is crushed in the crushing chamber.
(4) lower cover: there are discharge holes on the side. Inner Ring
Gear, main shaft, Hammer frame, Hammer head, fan blade,
classification wheel. The shell is divided into blowing zone, fine
crushing zone, grading zone, secondary crushing zone and coarse
crushing zone.
Crushing Part:cassia powder pulverizer
Crushing Effect:cassia powder pulverizer
