20 To 1800kg Per Hr Capacity 60 To 2500 Mesh Grinding Fineness
Konjac Crushing Machine
Product introduction:konjac crushing machine
BSP konjac pulverizer (air classifier) is a kind of pulverizer that can produce
extremely fine powder. Used for crushing sugar, the output can
reach 60~1000 mesh. For the grinding of dried ginger and turmeric,
this type can also be ground into a very fine powder. And the mill
can produce very uniform powder, and the distribution of the powder
is very uniform.
Technical data:konjac crushing machine
| Model | BSP-350 | BSP-450 | BSP-500 | BSP-750 |
| Input size(mm) | <15 | <15 | <15 | <15 |
| Fineness(mesh) | 60-2500 | 60-2500 | 60-2500 | 60-2500 |
| Capacity(kg/h) | 20-200 | 40-500 | 60-800 | 120-1800 |
| Crush motor(kw) | 11 | 18.5 | 30 | 55 |
| Grade motot(kw) | 1.5 | 4 | 5.5 | 11 |
| Blower(kw) | 7.5 | 11 | 18.5 | 37 |
| Feed motor(kw) | 0.55 | 0.55 | 0.75 | 1.5 |
| Discharge motor(kw) | 0.75 | 0.75 | 1.1 | 1.5 |
| Speed of principle axia(rpm) | -6500 | -5350 | -4600 | -3100 |
| Grading impeller speed(rpm) | 4000 | 4000 | 3500 | 3000 |
| Weight(kg) | 1600 | 1800 | 2300 | 3100 |
Working method:konjac crushing machine
The material enters the mill chamber through the screw conveyor,
where it is sheared and ground by the rapidly rotating blades. The
powder enters the classification chamber through the guide ring.
When the grading wheel rotates, both air and centrifugal force act
on the powder. The particles with a particle size larger than the
critical diameter (classified particle diameter) have a larger mass
and are thrown back into the mill chamber to be crushed again. The
particles with a particle size smaller than the critical diameter
enter the cyclone separator and dust box.
Advantages:konjac crushing machine
1. Compact design and reasonable structure. A grading mechanism is
set in the material to make grinding and grading work at the same
time and reduce energy consumption.
2. The machine is equipped with a fan for continuous heat
dissipation, which is suitable for grinding heat sensitive
materials.
3. Strong adaptability and narrow particle size distribution. The
particle size of the product is uniform, and the fineness can reach
80-320 mesh.
4. Under the condition of not stopping the machine, adjusting the
rotating speed or the air classifier can realize the uniform
distribution of product particle size.
5. The top cover of the main engine is opened by pneumatic spring.
The structure of the main body can be opened on both sides, so that
there are no obstacles when cleaning and repairing the internal
parts.
6. The main grinding parts are made of high-grade alloy tool steel,
which greatly extends the service life or replacement cycle of wear
parts.
7. The bearing system adopts imported high-speed precision bearing,
which makes the whole machine run smoothly with low vibration and
noise.
8. The pipeline has a quick disassembly structure, which is
convenient for disassembly and cleaning.
9. Equipped with cyclone separator and dust collector, no dust is
produced in the production process. The dust collecting bag can
effectively collect the fine powder in the air flow, so as to meet
the requirements of clean and environmental protection of waste gas
emission.
10. The fine powder collected in the bag can be effectively
recycled. Reduce material wear.
Grinding effect:konjac crushing machine
Detailed images:konjac crushing machine
Contact us,we can give you the most appropriate advice
our email: info@brightsail-asia.com
website:www.brsmill.com
Whatsapp: +8615961653782
